NAL

Stand F10

Visit Website

Giveaways

TBC

Documents

Products

Duckfoot Bend Retention Socket

The NAL Duckfoot Retention Socket system is a range of fittings designed to secure all types of directly cabled illuminated street furniture, enabling easy removal after impact simply with a key and a spanner. The Duckfoot Retention Socket is manufactured with a one-way duct bend offering a 360-degree swivel and cable entry through the base of the post.

Shallow Foundation Retention Socket

The NAL Shallow Foundation Retention Socket (or “Bridge Deck")is manufactured with a strengthening plate, and four bottom entry cable and duct access points. These Retention Systems are suitable for both illuminated and non-illuminated street furniture which are being installed in sites with severe depth restrictions, such as on top of bridge membranes, cellars, existing utility ducts/pipes, archaeology interests and your specific application.

Non-illuminated Retention Socket

The Non-Illuminated Retention Socket is manufactured with a flat base and has the ability to be shortened on site. It is suitable for any type of non–illuminated street furniture such as bollards, signposts, seating, railing, litter bins, barriers, cycle stands, bus stops and your specific application.

Rapid Charger Foundation

Providing a universal foundation for all EV rapid and ultra rapid charge units, this system incorporates the NAL Retention Socket. It is available with a range of adapter plates to fit bespoke designs and accommodate manufacturer-specific units.

Fast Charger Foundation

Created to simplify the cabling and installation process whilst future-proofing all installations, the NAL Fast Charger Foundation is a universal system that utilises a standard NAL Retention Socket, which can be installed at the civils stage and sealed until required. Dispensers can be surface mounted by installing the manufacturers’ specific adapter plate into the Retention Socket and then bolting the dispenser to the plate or installed directly.

Keep Left Bollard Adapter Plates

NAL provides an innovative solution for installing all types of non-illuminated, solar and ELV Flexible bollards. These particular types of bollards are usually located in highly vulnerable locations which are prone to repeated knockdowns. With the NAL Retention Socket foundation and Adapter Plate, a bollard can be replaced within minutes simply with a key and spanner, eliminating the need for disruptive and costly traffic management.

STAKKAbox Modula

The STAKKAbox™ system is a range of polypropylene preformed twin-wall modular access chambers. They have been developed for use in both footway and carriageway installations and are capable of withstanding vertical loads over 40 tonnes without the requirement for any structural support.

Composite Covers

NAL Composite Covers are lightweight and manufactured from glass re-enforced polyester resin. They feature a non-slip tread pattern to the surface side which exceeds a slip resistance value (SRV) of 80 and are produced in 12.5 tonne (B125) and 25 tonne (C250) vertical load capacities.

Controller Cabinet Base

The Controller Cabinet Base is manufactured to suit all standard UK and European traffic signal cabinets. Each gland tray provides up to 70 stepped grommets suitable to seal 2 to 20 core SWA cables. Pre-drilled castellation bars provide stability for all incoming cables.

X-Last Bollards

The X-Last Standard range of non-illuminated impact bollards is made from a unique polymer, making them highly resistant yet flexible and able to rebound to full strength following multiple impacts. Having undergone and passed extensive independent pedestrian and vehicle impact tests, these innovative bollards are classed as the safest, most durable and maintenance-free bollards available.